Specification:
The material intake system consists of two hydraulically driven toothed shafts .
The material picking mechanism has a 10-stage feed speed regulator and material discharge function.
The drive of the hydraulic system comes from the built-in hydraulic pump .
The chipper has a massive blade with a diameter of 610 mm and a thickness of 18 mm .
On the disc there are 4 double-sharpened cutting knives with dimensions of 210 mm x 60 mm .
In addition, a knife is attached against the blade guard .
The rotor design allows long-term work without loading the tractor .
All bearings protected against dust, felling, etc. are lubricated by easily accessible kalamitki.
On the disc there are also breakers (shovels) shredding the resulting cut to a value of 20-50 mm.
The three-point chopper (three-point linkage) is designed to work with a farm tractor with a minimum power of 18 km .
The drive from the tractor to the chipper is transmitted by means of a transmission shaft equipped with a safety pin, which is cut off in the event of too much load on the machine and disconnects the direct drive.
The chipper is additionally equipped with blade ventilation.
The set also includes a PTO shaft
The produced wood chips are thrown out through a 360 ° pipe rotated in relation to the chopper base.
The resulting chips have dimensions from 20mm to 60mm.
Model: BX42R
Size of shredded material: 10cm diameter (maximum 25cm with roots)
Drive system: Drive from tractor engine transmitted by PTO
Tractor minimum power: 18 KM
Impeller size: 63cm
Number of cutting knives: 4 + 1 Counterattack
Knife type: Hardened tool steel CR12
Rotor weight: 43 kg
Material feeding mechanism: Built-in pump and oil tank + 2 feed rollers
Fastening system: Three-point suspension system (three-point linkage)
Dimensions (with the batch funnel folded): 101cm L x 106cm W x 152cm W
Batch hopper: 50 x 50cm
Rotation range of the ejection pipe: 360
Height of the discharge pipe: 152cm
Rated revolutions per minute / rated revolutions: 540-1000
Chipper weight: 385 kg