Product description
An electric paint gun is an electrical device of the second class of insulation used to coat the surface with a layer of paint or lacquer.
How to use
Turn on and off:
To turn on the machine – press the switch to turn off the machine – release the switch. Before turning on, make sure the paint container is filled. The filter at the end of the suction tube must be submerged under the paint surface. In case the gun will suck air, the piston may become jammed. In this case, remove the plunger and clean it.
Adjustable spraying performance:
The spraying capacity can be adjusted using the adjustment knob. Make sure the adjusting knob is turned to the left most of the way before you start – ensure maximum efficiency. Turn on the gun and turn the knob until the desired performance is achieved.
Spray adjustment:
The spray width can be adjusted with the nozzle guard. Make sure the adjusting knob is firmly tightened before commencing operations. This will allow you to get a wide spray range for fine distribution. Loosen the nozzle cover lightly to narrow the spray width while increasing the drop. Just a quarter to half the turnover. Always pull the plug out of the socket before adjusting the cover.
painting:
Make sure that all surfaces that are not to be painted are thoroughly covered. Make sure the surface to be painted is clean, dry, free from grease and dust. Make a test on a piece of cardboard, adjust the gun.
Keep the device straight up vertically at a constant distance of approximately 30 cm from the painted surface. Move the device with the movement of the whole arm, not just the wrist, to avoid uneven spreading of the paint. Apply a few thin layers instead of one thick layer.
Leave to dry slightly before applying the next coat.
Applying paint to ceilings and floors:
For spraying ceilings and floors use a flexible spray tube. Unscrew the nozzle, make sure the valve and the valve spring remain in the cylinder. Screw the flexible pipe to paint the floors and ceilings on the cylinder. Bend the pipe in the right direction. Keep the device straight upright during operation.
After each use, clean the device thoroughly to avoid leaving any paint residue in the machine. This may cause the plunger to stick.
Contents of the package
The gun is supplied with the following accessories:
– spray gun
– paint tank
Viscosimeter
Technical data
Index number 79766
EAN 5906083797668
Brand Sthor
PCS unit
Gross Weight (kg) 1.5000
Power [W] 60
